Timing is usually the second question after price — understandably, since most homes need to plan around being out of a room, or the whole unit, while the work happens. Here's a realistic, phase-by-phase breakdown.
Inspection & Prep (30-60 minutes)
Every job starts with a walkthrough to confirm the floor's condition matches what was assessed from photos, followed by clearing and protecting furniture, fixtures and adjoining surfaces before any equipment comes out.
Diamond Honing & Polishing (Half a day to a full day per room)
This is the core of the job: progressive diamond pads work through several grit levels to remove etching and dullness, followed by a finer polishing pass. A single bedroom or small room is typically finished within half a day; a full living/dining area can take a full working day.
Filling & Repair, If Needed (Adds half a day or more)
If cracks or chips need filling, that step happens between grinding stages and adds curing time before the floor can be honed further — this is the main reason a job needing repair takes noticeably longer than a straightforward polish.
Sealing & Curing (Same day, plus drying time)
The final penetrating seal is applied after polishing and needs time to cure before the room can be walked on normally — typically a few hours for light foot traffic, with full cure taking longer before furniture and rugs go back.
Realistic Total Timelines
Putting it together: a standard single room typically takes 1 day including drying time. A full HDB flat generally runs 2-3 days, and larger landed properties or units needing repair work can take 3-5 days. These are planning estimates — your exact timeline depends on the floor's actual condition, which we'll confirm honestly after seeing photos or visiting in person.
Need a timeline for your specific floor?
Send us your floor area and photos on WhatsApp and we'll give you a realistic schedule.
